Changing Control Side on a Roller Blind

If you have received your blind with the control fitted on the wrong side, or if you would just like to swap the control end over, this takes minutes to do! The instructions include how to remove the blind from the brackets if it has already been installed.

Please see our video and written instructions below:

1. 1. Remove the blind from the brackets (if the blind has already been installed)
      • You can do this by firstly compressing the pin end of the blind to release from the bracket, you will then be able to remove the other side of the blind with ease.
   2. Pull out the control mechanism from the roller blind tube, followed by removing the .pin end.
      • You can use a small flathead screwdriver as a lever if this is found to be difficult to remove
   3. Simply swap them over, and re-insert them back into the roller tube!

If you are still having issues with this & you require further assistance, you can either give us a call on 0800 1488229 or email our customer service team at [e-mail].