Roman Blinds

What do you get?

We sell complete blinds only & will send you the full kit. This includes:

• Brackets (suitable for either top or face fixing)

• Head rail

• Built-in child safety mechanism

• Screws for fitting

• The fabric is attached to the blind by Velcro

• Nickel chain

Operation

All of our roman blinds are made with a sturdy chain operated system for complete control, with a built-in child safety mechanism which releases the chain when too much tension is applied.

Customisation

Lining Type

Stack Sizes

Stack size refers to the drop of the blind, when it is fully raised. This depends on the required blind drop, so if this query gets raised, we would need the required blind drop to ask for the supplier for the stack height.

Sizing Information

When fitting your blind outside the window recess, we recommend overlapping the window by at least 10cm on the width & drop. Please see our guide on how to measure for this here.

Recess Size

If you want to fit your blind within the window recess, you will need to order the blind as a 'Recess Size'. Please see our guide on how to measure for this here.

Make sure you do not make any reductions from these sizes yourself, because for a recess we will take a 1cm reduction from the width measurement you provide, to ensure the blind fits into the space.

No reductions will be taken from the width.

Blind Size

If you choose "Blind Size", we will use your measurements as the size of the blind in total. We will not make any reductions to this.

Head Rail

Our roman blind headrails measure approximately 4cm high and 3cm wide.